Amped Wireless routers are well known for their reliable and user-friendly experience. The Amped Wireless routers target to make the user’s wireless experience better so that the users have one less thing to worry about. Their routers contain some of the most advanced features with the help of which the users can personalize their network that is most suitable to their needs. The user can configure and gain access to the advanced features once the user has successfully logged in to their router after initially setting it up. The user can simply login to the Amped Wireless routers using www.setup.ampedwireless.com website.
After logging in to the router, there are a few recommended steps that must be taken to ensure the security on the router. The user must change the default username and password on their router to prevent any unauthorized users from accessing their network without their permission. The user must also update the firmware for their routers if there are any available. The firmware is the most crucial part of the router as it orchestrates the functions of the hardware on the device it is installed on. The updated firmware also ensures that the router stays capable of connecting to the latest media devices. The updated firmware also ensures that the security on the router is kept in check. The new firmware might even add some new features to the router as well as provide overall speed boosts.
Here, we will provide the basic configuration steps to ensure that the user can configure, control, monitor, personalize and even repair their network themselves.
Steps to initially setup and login to the TITAN High Power AC1900 Wi-Fi Router:
- Connect the Ethernet cable from the modem to the WAN port located at the back of the router.
- Now, connect another Ethernet cable from the desktop computer/laptop to any of the four internet ports of the router.
- Reboot all the three devices and wait for them to finish rebooting.
- Open any internet browser on the same device that is connected to the router. Type www.setup.ampedwireless.com in the address bar and press enter.
- The web based interface will appear asking the user for the default credentials regarding the router.
- Enter the default credentials for the router. The username and password will be case sensitive.
- Once the user has successfully logged in to the router, the Dashboard will appear containing all the advanced features and configuration settings for the router.
- The user can simply follow the easy on screen instructions to further configure their network.
Now, the user will have successfully setup and logged into the router without facing any problems.
Steps to reset the TITAN High Power AC1900 Wi-Fi Router:
- The reset button is located at the back of the router within a very small hole to prevent any accidental reset of the router.
- Using a pin, press and hold the reset button for about ten seconds. Release the reset button after ten seconds.
- Once the power light becomes green/white and stable, the router will have been reset to its factory default settings.
Once the router has been successfully reset, all the personalized settings of the user will also get reset. The process cannot be reversed after the reset has been completed.
Steps to change the username and password for the TITAN High Power AC1900 Wi-Fi Router:
- Open any web browser and type www.setup.ampedwireless.com in the address bar. Hit enter.
- The Amped Wireless router admin login page will appear prompting the user for the default information regarding the router.
- Enter the default credentials for the router to login to the router’s network. The username and password will be case sensitive.
- Once the user has logged in to the router, the Dashboard will appear.
- Click the Wi-Fi settings option.
- There, the user will see the Network Name (SSID) and the Network Key (passphrase) option.
- In the respective fields provided, the user can enter the new desired information for the router.
- Click Save to apply the settings made.
Once the user has successfully changed the information of the router, the user can reconnect all their devices using the new information.
Take Note:
- Do not enter any password hints within the username.
- Make sure the strength of the password is strong.
Steps to update the firmware of the TITAN High Power AC1900 Wi-Fi Router:
- Download the latest firmware from the www.ampedwireless.com/support site and save it on the device.
- Open any web browser and type www.setup.ampedwireless.com in the address bar. Hit enter.
- The router admin login page will appear prompting the user for the default information regarding the router.
- Enter the credentials for the router to login to the router’s network. The username and password will be case sensitive.
- Once the user has logged in to the router, the web based interface will appear.
- Click the ADVANCED option. Under the ADVANCED tab, the user will see the Firmware Update option.
- Click Browse to locate the firmware file.
- Click Upload to begin the update process.
Once the firmware has been updated, the router will reboot itself. After that, the user can start using their router as they please.
Take Note:
- Do not download the firmware file from any third party websites.
- Make sure that the firmware file is the latest version.